Support: (510) 226-0600 - Email: info@excessbid.com

Test Equipment

Price

Manufacturer

  • Previous
  • Page 1 of 1
  • Next
$119.00 $399.00
Agilent 10074C-FG Passive Probe 10:1, 150MHz, 1.5m *New* The Agilent 10074C 150 MHz passive probe is a great choice if you are looking for high quality at a very reasonable price.Designed specifically to give you optimal performance with your 6000 Series 100 MHz models and 54620 Series oscilloscopes.Ruggedized for general purpose measurements, it features a durable cable and solid stainless steel probe body encased with a hard, fracture-resistant plastic.General purpose retractable hook tip - hooks onto wires and test points for hands-free probing Ground bayonet - provides short, flexible ground lead for high-frequency measurements.General purpose alligator clip ground lead - allows for versatile grounding Color tags (2 tags in each color: orange, white, blue and green)by placing tags at both ends of the probe cable, you can quickly identify your probes.   • General purpose retractable hook tip - hooks onto wires and test points for hands-free probing• Ground bayonet -...
Agilent 10074C-FG Passive Probe 10:1, 150MHz, 1.5m *New* The Agilent 10074C 150 MHz passive probe is a great choice if...
Sold Out
Anritsu ML2438A Power Meter  *Used*  Combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphicsinto a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. Includes power cord and rack mount ears. No other hardware or accessories included. Condition:Used item, pulled from a working environment. Unit powers up. Case shows some wear.There is no rubber bumper around the edges of the item.
Anritsu ML2438A Power Meter  *Used*  Combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display...
$99.00
Agilent 3499A 5-Slot Switch/Control Mainframe *Used* No Modules  Includes power cord. There are no modules or other accessories included.   Accommodates up to five plug-in modules, routing up to 200 channels in a test system.With various switch modules, it can scan at rates up to 350 channels per second, or open/close 200 channels in less than 0.1 second.It is compact, requiring only 2U height in a full rack. It has a concise user interface that is designed for manual operation on themanufacturing floor or in desktop applications.  • Five module slots • Intuitive, self-guiding front panel interface • 2U rack height, full rack width • GPIB and RS-232 interfaces • Built-in Digital I/O   Condition:We are able to power on test the unit only. There are scratches, scuffs and some areas of wear on the case and front panel.  Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may...
Agilent 3499A 5-Slot Switch/Control Mainframe *Used* No Modules  Includes power cord. There are no modules or other accessories included.  ...
$499.00
LeCroy AP033 Differential Probe with Case and Accessories *Used*  The LeCroy AP033 is a high-performance active differential probe. High bandwidth, excellent common mode rejection ratio (CMRR) and  low-noise floor make it ideal for applications such as disk drive design and failure analysis as well as wireless and data communication design.   • 500 MHz Bandwidth • x10 Gain to ÷10 Attenuation Range • 10,000: 1 DC CMRR • Low 4 nV/ √ Hz Noise • 2 pF/Side Input C • 200 μ V/div - 10 V/div • Input ESD Protection • Autobalance Feature   Condition:Used item, pulled from a working environment. Includes everything you see in the photos. No other accessories included.   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the...
LeCroy AP033 Differential Probe with Case and Accessories *Used*  The LeCroy AP033 is a high-performance active differential probe. High bandwidth,...
$649.00
Storm Products 100-0030 SMP Calibration Kit *Used* Includes everything you see in the photos.    Includes: • 100-0016 Dielectric Connector Gauge, SMP Male • 100-0017 Center Conductor Connector Gauge, SMP Male • 100-0014 Dielectric Connector Gauge, SMP Female • 100-0013 Center Conductor Connector Gauge, SMP Female • 100-0033 Torque Wrench for SMP Calibration • Various adapters and wrenches • 4 Floppy disks with SMP calibration properties for the Agilent 8510, Agilent 87xx, Anritsu 37xx and Anritsu 360x   Condition:There are scratches, scuffs and some areas of wear on the wooden case. Offered "As-Is" Kit is in excellent condition.   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status...
Storm Products 100-0030 SMP Calibration Kit *Used* Includes everything you see in the photos.    Includes: • 100-0016 Dielectric Connector...
$99.00
Quest Electronics Model 2700 Impulse Sound Level Meter *Used, Power-On Tested* These meters are designed to provide you with a measurement of Sound Pressure Level (SPL) and maximum SPL for a variety of  combinations of user-selected response time constants, frequency weightings, measurement ranges and optional octave band filter settings.   Standards: Type 2 ANSI S1.4-1983, IEC 651-1979. Display: 3-1/2 Digit Liquid Crystal Display with an additional Quasi-Analog 60 dB indicator in 2 dB increments.  Level display indicates to 0.1 dB resolution. Indicators are included for Battery Check, Hold, and Overload Indication. Modes of Operation: Measures Sound Pressure Level (SPL) and Maximum Level (MAX). Peak Level (PEAK) and Impulse Level (IMP) can also be measured. Minimum Measurement: 35dBA. Using Linear Weighting with an Octave Filter Set. The minimum measurement varies depending on the filter frequency selected. Frequency Weighting Networks: A, B, C, and Linear. When using a filter set, any one of the weightings may be...
Quest Electronics Model 2700 Impulse Sound Level Meter *Used, Power-On Tested* These meters are designed to provide you with a...
$1,450.00
NoiseCom Programmable Noise Generator UFX.NPR-600 *Used, Power On Tested*  Unit was recently pulled from a working environment. It has been power on tested only.  Unit is very clean.    Note: There is no fan visible behind the grille on the rear. We don't know if there is supposed to be one.  The calibration seals are not broken.    Condition:  Offered "As-Is", as shown in the photos.   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. To the best of our knowledge, this item has been cleaned and handled in accordance...
NoiseCom Programmable Noise Generator UFX.NPR-600 *Used, Power On Tested*  Unit was recently pulled from a working environment. It has been...
Sold Out
Agilent 8648B Synthesized RF Signal Generator, 9 kHz to 2000 MHz *Used*  Includes power cord. No other accessories included. • Economical 2.0 GHz synthesized signal generator • Superior level accuracy • Wide frequency and output power coverage • Simple, dependable operation     Condition:Includes power cord. The plastic on the front screen has some cracks. There are no options installed or accessories included.  Pulled from a working environment. We are able to power on test the unit only.  There are scratches and scuffs on the case.  Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before...
Agilent 8648B Synthesized RF Signal Generator, 9 kHz to 2000 MHz *Used*  Includes power cord. No other accessories included. •...
Sold Out
HP 8153A Lightwave Multimeter Mainframe with 81531A Module *Used*  Includes HP 81531A Power Sensor Module and power cord. No other accessories included. Offers two slots for plug-in modules.Since modules can be combined in any configuration, the instrument can be used as a 1/2 channel power meter, a 1/2 channel light source, a loss test set, or even as a return loss test set.   Condition:We are able to power on test the unit only. It passes self tests. There are scratches and scuffs on the case. Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this...
HP 8153A Lightwave Multimeter Mainframe with 81531A Module *Used*  Includes HP 81531A Power Sensor Module and power cord. No other...
Sold Out
Keithley 7001 Switch Mainframe, No Cards *Power On Tested* The 7001 is a half-rack, high-density, two-slot mainframe with the highest density switching of any half-rack mainframe.  A built-in non-volatile memory will store up to 100 complete switch patterns.   DC, RF, and optical switch capability Supports industry's broadest range of signals Integrates easily with DMM and SourceMeter® instruments Full channel status display 2 card slots (No cards included) Supports more than 30 switch/control cards   Condition: Unit has been power on tested only. The case shows some wear.  There is no rack hardware or handle/stand.  Item is offered "As-Is"  
Keithley 7001 Switch Mainframe, No Cards *Power On Tested* The 7001 is a half-rack, high-density, two-slot mainframe with the highest...
Sold Out
Tektronix 11801A 8 Channel Digital Sampling Oscilloscope *Used* Listed options: 1F, 1S, 10, 2D, 4D. Includes power cord. No other accessories included. Takes 4 SD Series Plug Ins  The Tektronix 11801A is an Oscilloscope Mainframe that has 4 Slots and a bandwidth to 50 GHz.Has a touch-screen user interface and a powerful automatic measurement system.Also features single-ended and differential TDR and TDT, timing resolution to 0.01 ps, and up to 50 GHz bandwidth. • Vertical Resolution: 8 bits - 25 points/div • Input Sensitivity: 2-255 mV/div in 1 mV/div steps • Record Duration: 10 ps - 50 ms • Record Length: 512, 1024, 2048, 4096, 5120 samples • Sample Rate: up to 200 kHz • Jitter: 1.1 ps RMS + 4 ppm of position (typical) • Maximum Trigger Input: 1 V p-p (1x), 10 V p-p (10x), 2.5 V p-p prescaler • Trigger Sensitivity: 50 mV, DC-4 Ghz, AC coupled trigger prescaler...
Tektronix 11801A 8 Channel Digital Sampling Oscilloscope *Used* Listed options: 1F, 1S, 10, 2D, 4D. Includes power cord. No other accessories...
Sold Out
Wavetek 395 Synthesized Arbitrary Waveform Generator *For Parts or Repair* The Wavetek 395 Synthesized Arbitrary Waveform Genertor generates 11 standard waveforms:  square, sine, positive and negative ramps, pulse, noise, triangle, positive and negative haversines, sin(x)/x, and DC.  It provides square waves to 50 MHz, sine waves to 40 MHz, and triangles to 10 MHz, with synthesized accuracy and outputs  up to 10 Vpp (into 50 ohms) Direct digital synthesis (DDS) enables 10-digit frequency resolution for sine waves to 20 MHz and  for most other standard waveforms to 100 kHz.   Options Installed: 001, 002, 004   Condition: Unit has been power on tested only. It powers on, but none of the buttons respond.  The case shows some wear. Item is offered "As-Is, For parts or repair, No Returns."
Wavetek 395 Synthesized Arbitrary Waveform Generator *For Parts or Repair* The Wavetek 395 Synthesized Arbitrary Waveform Genertor generates 11 standard...
$149.00
HP 8116A Pulse/Function Generator 50 MHz *Used* Hewlett Packard Features pulse as well as function generator capabilities in one small unit.A broad 1 mHz to 50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility.These factors, plus good repeatability, make the HP 8116A a sound, long-term investment. Sine, triangle, square, and haver functions 1 MHz to 50 MHz, 32 Vpp for all waveforms Variable (10 ns min) pulse width, 6 ns transitions Modulation Self-prompting operating concept Error recognition and self test   Condition:Pulled from a working environment. We are able to power on test the unit only.There are scratches and scuffs on the case.There are no plastic feet on the bottom and there is some writing on the front panel.Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food...
HP 8116A Pulse/Function Generator 50 MHz *Used* Hewlett Packard Features pulse as well as function generator capabilities in one small...
$399.00
HP 8515A S-Parameter Test Set 45 MHz to 26.5 GHz, 3.5mm *Used*   The HP 8515A S-parameter test set is available for the HP 8510C network analyzer for broadband coaxial measurements from 45 MHz to 50 GHz.  It has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch.  For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors.  Also available are two 90 dB step attenuators (Not included), which allow control of the port 1 and port 2 signal levels.   45 MHz to 26.5 GHz Separate reference channel for each incident port Built-in electronic switch   Condition:We are able to power on test the unit only. It powers on, but there was a sticker saying it needs repair.  We don't know exactly what is in need of...
HP 8515A S-Parameter Test Set 45 MHz to 26.5 GHz, 3.5mm *Used*   The HP 8515A S-parameter test set is available...
Sold Out
Dynatech Nevada / Fluke 232D Electrical Safety Analyzer *Used, Power On Tested* There are no probes or other accessories included., as shown. Precision voltage, current, and resistance meter designed expressly for testing the electrical safety level of both the patient  environment and associated electrically operated equipment.   Meter: Measurements displayed on a 3%-digit LED display. Overrange indicated by a flashing 1999. The appropriate range selected automatically with the units of measure shown on the mode switch. During resistance measurements, a separate LED illuminates when the current source has been activated. Equipment Current: One range: 0.1to15.0 amps. Accuracy: 5% of range. Voltage: Three voltage ranges: 0.0 to 199.9 mV 0to1999 mV 0.0 to 199.9 V AAMI Load used for these measurements. Millivolt (m V) ranges autoranging. Voltage (V) ranges used for line voltage measurements of the test receptacle powering the analyzer. Millivolt (m V) ranges usable for external meter jack measurements. Full...
Dynatech Nevada / Fluke 232D Electrical Safety Analyzer *Used, Power On Tested* There are no probes or other accessories included.,...
$399.00
HP 8511A Frequency Converter, 45 MHz to 26.5 GHz *Needs Repair*    The HP 8511A, a 45 MHz to 26.5 GHz frequency converter, when combined with the HP 8510C Network Analyzer results in a general purpose  four-channel magnitude/phase receiver. Add your own power splitters for transmission measurements, and bridges or directional couplers for reflection measurements.  Since one input is used for system phase-lock, the other three inputs are available for measurements of multiport devices, subsystems, and antennas.  All four inputs on the have precision 3.5 mm connectors.   Four channel receiver/signal processor Frequency Range from 45 MHz to 26.5 Ghz Four separate RF to IF converters Excellent RF source tracking   Condition:We are able to power on test the unit only. It powers on, but there was a sticker saying it needs repair.  We don't know exactly what is in need of repair.  There are scratches and scuffs on the case...
HP 8511A Frequency Converter, 45 MHz to 26.5 GHz *Needs Repair*    The HP 8511A, a 45 MHz to 26.5 GHz...
$1,895.00
Rohde & Schwarz SMHU 835.8011.58 (100 kHz - 4320 MHz) Signal Generator *Used* Used to generate test signals for communications as well as radar systems.It is well suited for broadband frequency modulations for many of today's applications and offers high spectral purity,a variety of modulation capabilities as well as frequency hopping.  I/Q Modulator for Any Phase and Amplitude Modulation to 200 MHz High Spectral Purity Frequency Resolution 0.1 Hz RF, AF, Level, and Memory Sweeps Broadband FM DC to 1MHz I/Q Modulator for Any Phase and Amplitude Modulation (PSK, QAM, ASK, etc.), Modulation Bandwidth DC to 200 MHz Second, Coherent Carrier for Simple I/Q Demodulation Broadband Amplitude Modulation for TV Applications Broadband Frequency Modulation for Satellite Communications, Radar, and Video Applications Optional Coders (Not included) for Generating Modulating Signals for Digital Radio Networks to Relevant Standards (GSM, NADC, DECT, CDMA) Frequency Hopping - 4800 Stored Frequency and Level Settings Parallel...
Rohde & Schwarz SMHU 835.8011.58 (100 kHz - 4320 MHz) Signal Generator *Used* Used to generate test signals for communications...
Sold Out
*Lot of 3* Megger AVO Biddle Bite Receivers *Used* 246003, 246301 Auction includes 3 Receivers. 2 - Model 246301 and 1 - Model 246003. Includes only what you see in the photos. There are no chargers included (or other accessories). The receiver incorporates the potential leads, clamp-on current sensor, and data storage capabilities in one unit.  It stores more than 2000 sets of data (cell impedance, cell voltage and interconnecting strap resistance).  Stored data in the receiver can also be downloaded via the RS-232 connector directly to a personal computer or to the EBite transmitter. The receiver is powered by internal rechargeable batteries and are charged with a separate external charger.   Condition:Used item, pulled from a working environment. They are untested by us.The internal batteries may need replacement. Offered "As-Is"     Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S....
*Lot of 3* Megger AVO Biddle Bite Receivers *Used* 246003, 246301 Auction includes 3 Receivers. 2 - Model 246301 and...
$599.00
HP 3585A Spectrum Analyzer, 20Hz-40mHz *Used* Provides outstanding low frequency performance from 20Hz to 40.1MHz. includes power cord only.   Overall measurement accuracy is maintained within 0.4 dB by an internal calibration routine, performed by an internal microprocessor. Frequency Span range includes the entire frequency range with 0.1Hz resolution. Resolution Bandwidths of 3Hz to 30kHz in 1-3-10 sequence. Amplitude Measurement range from -137 dBm to +30 dBm (50 or 75 ohms) or 31 nV to 22 V (1 Mohm). A dynamic range of better than -80 dB. The built-in tracking generator provides output levels from 0 dBm to -11 dBm with a single turn knob.   Condition: Unit has been power on tested only.  The case shows some wear.  The screws holding the fan cover on the rear are bent/broken.  Item is offered "As-Is"  
HP 3585A Spectrum Analyzer, 20Hz-40mHz *Used* Provides outstanding low frequency performance from 20Hz to 40.1MHz. includes power cord only.  ...
$199.00
HP 4935A Transmission Test Set *Used* Option 002 is installed: P/AR, Deletes Noise-to-Ground    Transmission Impairment Measuring Set for installation and maintenance of voiceband data, wideband data, program and dds local loop circuits.  It features a choice of C-message, 3 kHz flat, 15 kHz flat, program, and 50 kbit filters as well as a choice of impedances.  Measurements include level, frequency, circuit noise, noise-with-tone, signal-to-noise ratio and noise-to-ground.  The 4935A measurements are compatible with the Bell (BSTR 41009) and IEEE (IEEE 743-1984) standards.   Level/frequency 20 Hz to 110 kHz  Noise and noise-to-ground  Noise-with-tone and signal-to-noise  Three-level impulse noise  IEEE 743-1984 North American Measurement standard  Transmit/receive connectors: WECO 310  100, 120, 220 240 Vac +5% -10%; 45-66 Hz operation Basic analog tests to isolate faults and to qualify circuits for voice, data, and broadcast service  Compatible with the Bell standards (BSTR 41009) and IEEE standards (IEEE 743-1984)    Condition: Unit has...
HP 4935A Transmission Test Set *Used* Option 002 is installed: P/AR, Deletes Noise-to-Ground    Transmission Impairment Measuring Set for installation and...
$399.00
Hewlett Packard 8410C Network Analyzer w/ 8414A Polar Display *Used* The 8410C Network Analyzer Mainframe operates from 110MHz to 18GHzThe 8414A Polar Display Plug in is for displaying the relative phase and magnitude in polar form.Includes power cord. No other accessories included. Condition:Unit has been power on tested. It powers on and the polar display lights up.The power button seems hard to turn on-off.There is some scratching on the case (see photos).There are no plastic feet on the bottom. Offered "As-Is".  
Hewlett Packard 8410C Network Analyzer w/ 8414A Polar Display *Used* The 8410C Network Analyzer Mainframe operates from 110MHz to 18GHzThe 8414A...
  • Previous
  • Page 1 of 1
  • Next