Support: (510) 226-0600 - Email: info@excessbid.com

Test Equipment

Price

Manufacturer

  • Previous
  • Page 1 of 1
  • Next
Sold Out
Dynatech Nevada / Fluke 232D Electrical Safety Analyzer *Used, Power On Tested* There are no probes or other accessories included., as shown. Precision voltage, current, and resistance meter designed expressly for testing the electrical safety level of both the patient  environment and associated electrically operated equipment.   Meter: Measurements displayed on a 3%-digit LED display. Overrange indicated by a flashing 1999. The appropriate range selected automatically with the units of measure shown on the mode switch. During resistance measurements, a separate LED illuminates when the current source has been activated. Equipment Current: One range: 0.1to15.0 amps. Accuracy: 5% of range. Voltage: Three voltage ranges: 0.0 to 199.9 mV 0to1999 mV 0.0 to 199.9 V AAMI Load used for these measurements. Millivolt (m V) ranges autoranging. Voltage (V) ranges used for line voltage measurements of the test receptacle powering the analyzer. Millivolt (m V) ranges usable for external meter jack measurements. Full...
Dynatech Nevada / Fluke 232D Electrical Safety Analyzer *Used, Power On Tested* There are no probes or other accessories included.,...
$149.00
HP 8116A Pulse/Function Generator 50 MHz *Used* Hewlett Packard Features pulse as well as function generator capabilities in one small unit.A broad 1 mHz to 50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility.These factors, plus good repeatability, make the HP 8116A a sound, long-term investment. Sine, triangle, square, and haver functions 1 MHz to 50 MHz, 32 Vpp for all waveforms Variable (10 ns min) pulse width, 6 ns transitions Modulation Self-prompting operating concept Error recognition and self test   Condition:Pulled from a working environment. We are able to power on test the unit only.There are scratches and scuffs on the case.There are no plastic feet on the bottom and there is some writing on the front panel.Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food...
HP 8116A Pulse/Function Generator 50 MHz *Used* Hewlett Packard Features pulse as well as function generator capabilities in one small...
Sold Out
Tektronix 11801A 8 Channel Digital Sampling Oscilloscope *Used* Listed options: 1F, 1S, 10, 2D, 4D. Includes power cord. No other accessories included. Takes 4 SD Series Plug Ins  The Tektronix 11801A is an Oscilloscope Mainframe that has 4 Slots and a bandwidth to 50 GHz.Has a touch-screen user interface and a powerful automatic measurement system.Also features single-ended and differential TDR and TDT, timing resolution to 0.01 ps, and up to 50 GHz bandwidth. • Vertical Resolution: 8 bits - 25 points/div • Input Sensitivity: 2-255 mV/div in 1 mV/div steps • Record Duration: 10 ps - 50 ms • Record Length: 512, 1024, 2048, 4096, 5120 samples • Sample Rate: up to 200 kHz • Jitter: 1.1 ps RMS + 4 ppm of position (typical) • Maximum Trigger Input: 1 V p-p (1x), 10 V p-p (10x), 2.5 V p-p prescaler • Trigger Sensitivity: 50 mV, DC-4 Ghz, AC coupled trigger prescaler...
Tektronix 11801A 8 Channel Digital Sampling Oscilloscope *Used* Listed options: 1F, 1S, 10, 2D, 4D. Includes power cord. No other accessories...
Sold Out
Fluke 88 Automotive Digital Multimeter with Probes and Case *Used* Comes with probes, alligator clips, plastic case and user manual, as shown.   Volts, ohms, amps, continuity and diode test Milliseconds pulse width measurements RPM measurements with inductive pickup Min/Max/Avg recording Frequency and duty cycle measurements Lo Ohms function Bright White Backlit display Rugged, Hard-Shell Carrying Case Test Leads with interchangeable Test Probes and Wide Jaw Alligator Clips Sleep mode 10 Megohm input impedance Cat II 300 V     Condition:  Used item, pulled from a working environment. It has been power-on tested only.  There is a battery installed. It is working, but we don’t know how long it will last.  There is some writing in Sharpie on both the meter and case. Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and...
Fluke 88 Automotive Digital Multimeter with Probes and Case *Used* Comes with probes, alligator clips, plastic case and user manual,...
Sold Out
HP 8153A Lightwave Multimeter Mainframe with 81531A Module *Used*  Includes HP 81531A Power Sensor Module and power cord. No other accessories included. Offers two slots for plug-in modules.Since modules can be combined in any configuration, the instrument can be used as a 1/2 channel power meter, a 1/2 channel light source, a loss test set, or even as a return loss test set.   Condition:We are able to power on test the unit only. It passes self tests. There are scratches and scuffs on the case. Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this...
HP 8153A Lightwave Multimeter Mainframe with 81531A Module *Used*  Includes HP 81531A Power Sensor Module and power cord. No other...
$79.00
Agilent 8493C Coaxial Attenuator, DC-26.5 GHz, 003dB, 3.5 mm Connectors *Used*     The 8493C, dc to 26.5 GHz, coaxial fixed attenuator provides precision attenuation, flat frequency response, low SWR over broad frequency rangeNo other accessories included. Superior RF Performance:  • Maximum frequency: 26.5 GHz • 003 dB • APC-3.5 connectors Condition: Used item, pulled from a working environment. We are offering this item "As-Is".   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. To the best of our knowledge, this item has been cleaned and handled in accordance with the manufacturer’s instructions...
Agilent 8493C Coaxial Attenuator, DC-26.5 GHz, 003dB, 3.5 mm Connectors *Used*     The 8493C, dc to 26.5 GHz, coaxial fixed attenuator...
Sold Out
Agilent 8648B Synthesized RF Signal Generator, 9 kHz to 2000 MHz *Used*  Includes power cord. No other accessories included. • Economical 2.0 GHz synthesized signal generator • Superior level accuracy • Wide frequency and output power coverage • Simple, dependable operation     Condition:Includes power cord. The plastic on the front screen has some cracks. There are no options installed or accessories included.  Pulled from a working environment. We are able to power on test the unit only.  There are scratches and scuffs on the case.  Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before...
Agilent 8648B Synthesized RF Signal Generator, 9 kHz to 2000 MHz *Used*  Includes power cord. No other accessories included. •...
Sold Out
Yokogawa DL-750 Scopecorder w/ 2 Modules *Used, Power-On Tested* 701210, 701260  Includes Power Cord and 2 - 701260 HV (with RMS) Modules. Suffix: -D-J3-HE/C8/C10/M3 Designed for electro-mechanical systems, the ScopeCorder delivers higher vertical resolution, channel count, isolation,filtering, and abundant acquisition memory. As a diagnostic tool, the ScopeCorder offers all the analysis tools of a modern digital oscilloscope,like cursors, waveform parameter calculations, math and DSP channels, FFT's, and more.In most cases, you can analyze your data and get results immediately, with no offline post-processing.   Condition:  Unit powers on and is in working condition. There is some light scratching on the case and display.  There are fresh batteries in the battery compartment.  There is a small piece of broken plastic inside that sometimes moves around.   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies....
Yokogawa DL-750 Scopecorder w/ 2 Modules *Used, Power-On Tested* 701210, 701260  Includes Power Cord and 2 - 701260 HV (with...
$1,450.00
NoiseCom Programmable Noise Generator UFX.NPR-600 *Used, Power On Tested*  Unit was recently pulled from a working environment. It has been power on tested only.  Unit is very clean.    Note: There is no fan visible behind the grille on the rear. We don't know if there is supposed to be one.  The calibration seals are not broken.    Condition:  Offered "As-Is", as shown in the photos.   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. To the best of our knowledge, this item has been cleaned and handled in accordance...
NoiseCom Programmable Noise Generator UFX.NPR-600 *Used, Power On Tested*  Unit was recently pulled from a working environment. It has been...
Sold Out
HP 84815A Peak Power Sensor *Used*   No other accessories included. The 84815A peak power sensor is compatible with the 8990/1A peak power analyzers and the 8992A digital video power analyzer.This sensor gives you outstanding measurement accuracy in demanding situations and includes automatic temperature sensing and correction. Outstanding measurement accuracy Automatic temperature sensing and correction Frequency Range: 20 MHz to 18 GHz   Condition:Used item, pulled from a working environment.  We are offering this item "As-Is".   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. To the best of our knowledge,...
HP 84815A Peak Power Sensor *Used*   No other accessories included. The 84815A peak power sensor is compatible with the 8990/1A...
Sold Out
Quest Electronics Model 2700 Impulse Sound Level Meter *Used, Power-On Tested* These meters are designed to provide you with a measurement of Sound Pressure Level (SPL) and maximum SPL for a variety of  combinations of user-selected response time constants, frequency weightings, measurement ranges and optional octave band filter settings.   Standards: Type 2 ANSI S1.4-1983, IEC 651-1979. Display: 3-1/2 Digit Liquid Crystal Display with an additional Quasi-Analog 60 dB indicator in 2 dB increments.  Level display indicates to 0.1 dB resolution. Indicators are included for Battery Check, Hold, and Overload Indication. Modes of Operation: Measures Sound Pressure Level (SPL) and Maximum Level (MAX). Peak Level (PEAK) and Impulse Level (IMP) can also be measured. Minimum Measurement: 35dBA. Using Linear Weighting with an Octave Filter Set. The minimum measurement varies depending on the filter frequency selected. Frequency Weighting Networks: A, B, C, and Linear. When using a filter set, any one of the weightings may be...
Quest Electronics Model 2700 Impulse Sound Level Meter *Used, Power-On Tested* These meters are designed to provide you with a...
$649.00
Storm Products 100-0030 SMP Calibration Kit *Used* Includes everything you see in the photos.    Includes: • 100-0016 Dielectric Connector Gauge, SMP Male • 100-0017 Center Conductor Connector Gauge, SMP Male • 100-0014 Dielectric Connector Gauge, SMP Female • 100-0013 Center Conductor Connector Gauge, SMP Female • 100-0033 Torque Wrench for SMP Calibration • Various adapters and wrenches • 4 Floppy disks with SMP calibration properties for the Agilent 8510, Agilent 87xx, Anritsu 37xx and Anritsu 360x   Condition:There are scratches, scuffs and some areas of wear on the wooden case. Offered "As-Is" Kit is in excellent condition.   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status...
Storm Products 100-0030 SMP Calibration Kit *Used* Includes everything you see in the photos.    Includes: • 100-0016 Dielectric Connector...
Sold Out
LeCroy AP033 Differential Probe with Case and Accessories *Used*  The LeCroy AP033 is a high-performance active differential probe. High bandwidth, excellent common mode rejection ratio (CMRR) and  low-noise floor make it ideal for applications such as disk drive design and failure analysis as well as wireless and data communication design.   • 500 MHz Bandwidth • x10 Gain to ÷10 Attenuation Range • 10,000: 1 DC CMRR • Low 4 nV/ √ Hz Noise • 2 pF/Side Input C • 200 μ V/div - 10 V/div • Input ESD Protection • Autobalance Feature   Condition:Used item, pulled from a working environment. Includes everything you see in the photos. No other accessories included.   Medical Items Disclaimer (For Medical Items)... The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the...
LeCroy AP033 Differential Probe with Case and Accessories *Used*  The LeCroy AP033 is a high-performance active differential probe. High bandwidth,...
$99.00
Agilent 3499A 5-Slot Switch/Control Mainframe *Used* No Modules  Includes power cord. There are no modules or other accessories included.   Accommodates up to five plug-in modules, routing up to 200 channels in a test system.With various switch modules, it can scan at rates up to 350 channels per second, or open/close 200 channels in less than 0.1 second.It is compact, requiring only 2U height in a full rack. It has a concise user interface that is designed for manual operation on themanufacturing floor or in desktop applications.  • Five module slots • Intuitive, self-guiding front panel interface • 2U rack height, full rack width • GPIB and RS-232 interfaces • Built-in Digital I/O   Condition:We are able to power on test the unit only. There are scratches, scuffs and some areas of wear on the case and front panel.  Offered "As-Is"   Medical Items Disclaimer (For Medical Items)... The sale of this item may...
Agilent 3499A 5-Slot Switch/Control Mainframe *Used* No Modules  Includes power cord. There are no modules or other accessories included.  ...
Sold Out
Anritsu ML2438A Power Meter  *Used*  Combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphicsinto a single instrument that samples at more than 35K per second and achieves 90 dB dynamic range with a single sensor. Includes power cord and rack mount ears. No other hardware or accessories included. Condition:Used item, pulled from a working environment. Unit powers up. Case shows some wear.There is no rubber bumper around the edges of the item.
Anritsu ML2438A Power Meter  *Used*  Combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display...
$119.00 $399.00
Agilent 10074C-FG Passive Probe 10:1, 150MHz, 1.5m *New* The Agilent 10074C 150 MHz passive probe is a great choice if you are looking for high quality at a very reasonable price.Designed specifically to give you optimal performance with your 6000 Series 100 MHz models and 54620 Series oscilloscopes.Ruggedized for general purpose measurements, it features a durable cable and solid stainless steel probe body encased with a hard, fracture-resistant plastic.General purpose retractable hook tip - hooks onto wires and test points for hands-free probing Ground bayonet - provides short, flexible ground lead for high-frequency measurements.General purpose alligator clip ground lead - allows for versatile grounding Color tags (2 tags in each color: orange, white, blue and green)by placing tags at both ends of the probe cable, you can quickly identify your probes.   • General purpose retractable hook tip - hooks onto wires and test points for hands-free probing• Ground bayonet -...
Agilent 10074C-FG Passive Probe 10:1, 150MHz, 1.5m *New* The Agilent 10074C 150 MHz passive probe is a great choice if...
  • Previous
  • Page 1 of 1
  • Next